This file contains small hints on using my small Program.

Installation:

Take a look at the src/globals.h file, and adjust the defines to your
needs. The global config files will be installed under /etc/gpsk31. 

Simply type './configure', and then 'make;make install'. There should be no Errors. You must
have the gtk-libs correctly installed. The Application will be installed
under '/usr/X11R6/bin'. If you don't like that, simply type: 
	'./configure --bindir=<xyz>'.


Operation:

F-11: TX
F-12: RX

During operation you may hit the F10-Key. You will get a window where you can
enter all the information about the current QSO, and also write to the Log (not
yet ready). This Information will be used for the macros (see below)


Fixtexts:

You may create up to 8 fixtexts under ~/.gpsk31. Create simple text files
(f1.txt ... f8.txt). You are able to send them with F1..F8. The Buttons on the
screen are not yet ready. You can use macros in there texts:

~t --> Transmit ON
~r --> Receive
~~ --> sends '~'
~c --> sends the others Callsign
~n --> sends the others Name
~q --> sends the others QTH
~s --> sends the RST for the other Station

If you hit F10, a window will appear, where you can enter all the data for a contact.
Log function is not year ready.


If the Phase Scope is RED, DCD is OFF, and AFC will not work. If the DCD is 
ON (Phase Scope is YELLOW), AFC is working. You can adjust the DCD-Level with
the slider between the Phase Scope and the Spectrum Display.

You may want to change the AFC/NET options. Simple klick on the buttons you see, or
use the ALT-Key shortcuts.
You can change the frequencies directly using the 2 spin buttons 
or +/- keys (arrow block). You can also
click to a station you see in the spectrum analizer to tune into it.

If you don't like the look of gpsk31, simply edit the /etc/gpsk31/gtkrc file and
adjust it to your needs.

The CW_ID option is not yet ready

						vy 73's de Luc, LX2GT

Any questions/suggestions/patches to lx2gt@qsl.net

